Allied Telesis AT-9724TS specifications Stacking Information

		Figure 9- 14. Rx Size Analysis window (table)
The following fields can be set or viewed:
	Parameter	Description
	Time Interval	Select the desired setting between 1s and 60s, where "s" stands for seconds.The default value is one second.
	Record Number	Select number of times the Switch will be polled between 20 and 200.The default value is 200.
64		The total number of packets (including bad packets) received that were 64 octets in length (excluding framing
65-127		bits but including FCS octets).
		The total number of packets (including bad packets) received that were between 65 and 127 octets in length
128-255		inclusive (excluding framing bits but including FCS octets).
		The total number of packets (including bad packets) received that were between 128 and 255 octets in length
256-511		inclusive (excluding framing bits but including FCS octets).
		The total number of packets (including bad packets) received that were between 256 and 511 octets in length
512-1023		inclusive (excluding framing bits but including FCS octets).
		The total number of packets (including bad packets) received that were between 512 and 1023 octets in length
1024-1518		inclusive (excluding framing bits but including FCS octets).
		The total number of packets (including bad packets) received that were between 1024 and 1518 octets in
	Show/Hide	length inclusive (excluding framing bits but including FCS octets).
		Check whether or not to display 64, 65-127, 128-255, 256-511, 512-1023, and 1024 1518 packets received
	Clear	1024-1518 packets received.
		Clicking this button clears all statistics counters on this window.
	View Table	Clicking this button instructs the Switch to display a table rather than a line graph.
	View Line Chart	Clicking this button instructs the Switch to display a line graph rather than a table.

Stacking Information

To change a switch’s default stacking configuration (for example, the order in the stack), see Box Information in the Configuration folder.

The number of switches in the switch stack (up to 12 total) are displayed in the upper right-hand corner of your web-browser.The icons are in the same order as their respective Unit numbers, with the Unit 1 switch corresponding to the icon in the upper left-most corner of the icon group.

When the switches are properly interconnected through their optional Stacking Modules, information about the resulting switch stack is displayed under the Stack Information link.

To view the stacking information, click on the Stacking Information link from the Monitoring folder:

Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch 166