
Figure 7- 16. Enable Method List – Edit window
|
| Figure 7- 17. Enable Method List – Add window |
To define an Enable Login Method List, set the following parameters and click Apply: | ||
| Parameter | Description |
| Method List Name | Enter a method list name defined by the user of up to 15 characters. |
| Method 1, 2, 3, 4 | The user may add one, or a combination of up to four (4) of the following authentication methods to this |
|
| method list: |
local_enable – Adding this parameter will require the user to be authenticated using the local enable password database on the Switch.The local enable password must be set by the user in the next section entitled Local Enable Password.
none – Adding this parameter will require no authentication to access the Switch.
radius – Adding this parameter will require the user to be authenticated using the RADIUS protocol from a remote RADIUS server.
tacacs – Adding this parameter will require the user to be authenticated using the TACACS protocol from a remote TACACS server.
xtacacs – Adding this parameter will require the user to be authenticated using the XTACACS protocol from a remote XTACACS server.
tacacs+ – Adding this parameter will require the user to be authenticated using the TACACS protocol from a remote TACACS server.
server_group – Adding a previously configured server group will require the user to be authenticated using a
Local Enable Password
This window will configure the locally enabled password for the Enable Admin command.When a user chooses the "local_enable" method to promote user level privileges to administrator privileges, he or she will be prompted to enter the password configured here that is locally set on the Switch.
To view the following window, click Security Management > Access Authentication Control > Local Enable Password:
Allied Telesyn | 141 |