
| Parameter | Description |
|
| User Name | Enter a User Name of no more than 15 characters to identify the SSH user.This User Name must be a | |
| Auth. Mode | previously configured user account on the Switch. | |
| The administrator may choose one of the following to set the authorization for users attempting to access the | ||
|
| Switch. | |
|
| Host Based – This parameter should be chosen if the administrator wishes to use a remote SSH server for | |
|
| authentication purposes. Choosing this parameter requires the user to input the following information to | |
|
| identify the SSH user. | |
|
| Host Name – Enter an alphanumeric string of no more than 32 characters to identify the remote SSH | |
|
| user. | |
|
| Host IP – Enter the corresponding IP address of the SSH user. | |
|
| Password – This parameter should be chosen if the administrator wishes to use an | |
|
| password for authentication. Upon entry of this parameter, the Switch will prompt the administrator for a | |
|
| password, and then to | |
|
| Public Key – This parameter should be chosen if the administrator wishes to use the publickey on a SSH server | |
| Host Name | for authentication. | |
| Enter an alphanumeric string of no more than 32 characters to identify the remote SSH user.This parameter is | ||
| Host IP | only used in conjunction with the Host Based choice in the Auth. Mode field. | |
| Enter the corresponding IP address of the SSH user.This parameter is only used in conjunction with the Host | ||
|
| Based choice in the Auth. Mode field. |
|
Click Apply to implement changes made. |
|
|
Note: To set the SSH User Authentication parameters on the Switch, a User Account must be previously configured. For more information on configuring local User Accounts on the Switch, see the User Accounts section of this manual located in this section.
Allied Telesyn | 148 |