VLAN Name | VID | Network Number | IP Address |
System (default) | 1 | 10.32.0.0 | 10.32.0.1 |
Engineer | 2 | 10.64.0.0 | 10.64.0.1 |
Marketing | 3 | 10.96.0.0 | 10.96.0.1 |
Finance | 4 | 10.128.0.0 | 10.128.0.1 |
Sales | 5 | 10.160.0.0 | 10.160.0.1 |
Backbone | 6 | 10.192.0.0 | 10.192.0.1 |
Table 6- 6.VLAN Example – Assigned IP Interfaces
The 6 IP interfaces, each with an IP address (listed in the table above), and a subnet mask of 255.224.0.0 can be entered into the Setup IP Interface window.
To setup IP Interfaces on the Switch:
Go to the Configuration folder, and click on the Layer 3 IP Networking folder, and then click on the IP Interfaces Table link to open the following dialog box:
Figure 6- 85. IP Interface Table window
To setup a new IP interface, click the Add button.To edit an existing IP Interface entry, click on an entry under the Interface Name heading. Both actions will result in the same screen to configure, as shown below.
Figure 6- 86. IP Interface Configuration – Add window
Allied Telesyn | 94 |
