Allied Telesis AT-9724TS specifications Parameter Description Index, Server IP, Severity, Facility

Parameter	Description
Index	Syslog server settings index (1-4).
Server IP	The IP address of the Syslog server.
Severity	This drop-down menu allows you to select the level of messages that will be sent.The options are Warning,
Facility	Informational, and All.
	Some of the operating system daemons and processes have been assigned Facility values. Processes and
	daemons that have not been explicitly assigned a Facility may use any of the "local use" facilities or they may use
	the "user-level" Facility.Those Facilities that have been designated are shown in the following: Bold font
	denotes the facility values that the Switch currently implements.
	Numerical Code		Facility
	0	kernel messages
	1	user-level messages
	2	mail system
	3	system daemons
	4	security/authorization messages
	5	messages generated internally by syslog line printer subsystem
	7	network news subsystem
	8	UUCP subsystem
	9	clock daemon
	10	security/authorization messages
	11	FTP daemon
	12	NTP subsystem
	13	log audit
	14	log alert
	15	clock daemon
	16	local use 0 (local0)
	17	local use 1 (local1)
	18	local use 2 (local2)
	19	local use 3 (local3)
	20	local use 4 (local4)
	21	local use 5 (local5)
	22	local use 6 (local6)
	23	local use 7 (local7)

UDP Port (514 or 6000-65535)Type the UDP port number used for sending Syslog messages.The default is 514.

Status Choose Enabled or Disabled to activate or deactivate.

To set the System Log Server configuration, click Apply.To delete an entry from the Current System Log Server window, click the corresponding ✘ under the Delete heading of the entry to delete.To return to the Current System Log Servers window, click the Show All System Log Servers link.

Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch 73