2Using "Windows Embedded Standard 7"
Using the Standalone restore solution
Restore the system using a restore image saved on the product.
1After the power is connected, press the Home key immediately after the system starts during boot to enter the boot menu.
2Select the Recovery Mode menu and press the P key to enter "admin" which is the password.
3Run the Recovery Mode menu by pressing the Enter key.
4If the PROMPT "root@xxxxx:/#" appears, enter "recovery" to restore the system.
5If PROMPT appears after a message informing that the system is successfully restored, run the reboot command to restart the system.
Disk is configured as follows. Deleting or changing partitions may disable booting or the Standalone restore solution.
BOOT_AGENT | WES7 | BACKUP |
|
|
|
Drive Letter is not defined | C: | Drive Letter is not defined |
|
|
|
Data saved by the user and customized settings are deleted after a system restore.
2 Using "Windows Embedded Standard 7" 42