Using Auto Backup to send photos or videos

You can send photos or videos that you captured with the camera to a PC wirelessly.

Installing the program for Auto Backup on your PC

1Install i-Launcher on the PC. (p. 108)2Connect the camera to the PC with the USB cable.3When the Auto Backup program icon appears, click it.

￿￿The Auto Backup program is installed on the PC. Follow the on-screen instructions to complete the installation.

4Remove the USB cable.

Before installing the program, ensure that the PC is connected to a network.

Sending photos or videos to a PC

1Rotate the mode dial to w.

2Select .

￿￿If the pop-up message that prompts you to download the application appears, select Next.

￿￿The camera will automatically attempt to connect to a WLAN via the most recently connected AP device.

￿￿If the camera has not previously been connected to a WLAN, it will search for available AP devices. (p. 115)

Wireless network 127