Samsung WB350F Connecting to a WLAN and configuring network settings, Connecting to a WLAN, WPS, If a, Select, WPS AP, Ad hoc AP, Secured AP, 4Select an AP, Signal strength

Connecting to a WLAN and configuring network settings

Learn to connect via an access point (AP) when you are in a range of a WLAN. You can also configure network settings.

Connecting to a WLAN

1Rotate the mode dial to w.2Select , , , , or .3Follow the on-screen instructions until the Wi-Fi Setting screen appears.￿￿The camera automatically searches for available AP devices.￿￿In some modes, press [m], and then select Wi-Fi Setting.4Select an AP.

Refresh

Back

￿￿Select Refresh to refresh the list of connectable APs.

￿￿Select Add wireless network to add an AP manually. The AP name must be in English to add the AP manually.

Icon Description

Ad hoc APSecured APWPS APSignal strengthPress [t] or touchto open AP setting options.

￿￿When you select a secured AP, a pop-up window appears. Enter the required passwords to connect to the WLAN. For information about entering text, refer to "Entering text". (p. 118)

￿￿When a login page appears, refer to "Using the login browser". (p. 116)

￿￿When you select an unsecured AP, the camera will automatically connect to the WLAN.

￿￿If you select a WPS profile supported AP, select→WPS PIN connection, and then enter a PIN on the AP device. You can also connect to a WPS profile supported AP by selecting→WPS button connection on the camera, and then pushing the WPS button on the AP device.

￿￿If a pop-up message about data collection regulations appears, read and agree to it.

Wireless network 115