Using Samsung Link to send files

Viewing photos or videos on devices that support Samsung Link

1Rotate the mode dial to w.

2Select →Nearby devices.

￿￿If the guide message appears, select OK.

￿￿The camera will automatically attempt to connect to a WLAN via the most recently connected AP device.

￿￿If the camera has not previously been connected to a WLAN, it will search for available AP devices. (p. 115)

￿￿You can set to allow only selected devices or all devices to connect by pressing [m], and then selecting DLNA Access Control on the screen.

￿￿A sharing file list is created. Wait until other devices can find your camera.

3Connect the Samsung Link device to a network, and then turn on the Samsung Link feature.

￿￿Refer to your device's user manual for more information.

4On the camera, allow the Samsung Link device to connect to your camera.

5On the Samsung Link device, select a camera to connect to.

6On the Samsung Link device, browse the shared photos or videos.

￿￿For information about searching for the camera and browsing the photos or videos on the Samsung Link device, refer to the device's user manual.

￿￿Videos may not play smoothly depending on the type of Samsung Link device or the network condition. If this happens, re-record the video in

640 X 480 or smaller quality and play it again. If videos do not play smoothly on your device over the wireless connection, try connecting the camera to the device with an A/V cable.

AP

￿The camera is connected to a TV that supports Samsung Link via WLAN.

Wireless network 135