*Disassemble as the picture (refer to the Set disassembly diagram) and remove the current battery from BAT1, then insert the new battery.

-Pull back the holder on the left of the battery

-Hold both sides and remove the battery

-Replace with the new battery

>no-power

NO-POWER

 

 

 

 

 

 

 

No

 

 

 

 

 

 

 

 

 

 

 

 

Is the power cord connected?

 

Connect the power cord.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Yes

Is the Power switch turned on?

 

No

Turn on the Power Switch

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Yes

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Check the u-Vending internals.

 

 

 

 

Complete

(Contact a service center.)

 

 

 

 

 

 

 

 

 

 

 

 

> No - Sound

No - Sound

Is the speaker cable

connected?

Yes

Is the volume level normal?

(Refer to uVending

management Software.)

Yes

Check the u-Vending internals.

(Contact a service center.)

No

Connect the speaker cable.

No

Increase the volume.

Complete

English - uVending

14