3 | On the dialog that appears, click the Support tab. |
4 | On the Support Tab, click the Details button. The Network connection values are displayed. |
Connecting to a Wireless Network
How to set up manually | |
1 | Go to the Network Settings screen. Select Start, press E, and then press Eagain. |
2 | The network test screen appears and the verification process starts. Press Stop. The verification |
The LAN Port on the Wall
Wireless IP sharer
(router having DHCP server)
| process stops. |
3 | Select IP Settings on network connection screen. The IP Settings screen appears. |
4 | Select the field at the top, press E, and then set IP Setting to Enter manually. Repeat the entry |
| process for each field in the IP Address. |
| ――Setting IP Setting to Enter manually automatically changes DNS setting to Enter manually. |
5 | When done, select OK at the bottom of the page, and then press E. The network test screen |
| appears and the verification process starts. |
6 | When the connection has been verified, the “Wired network and Internet connection |
| completed.” message appears. |
LAN Cable
Samsung recommends using IEEE 802.11n. When you play video over a network connection, the video may not play smoothly.
――Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer is currently being used by another device nearby, this will result in interference and communication failure.
――Your product supports only the following wireless network security protocols.
If you select the Pure
――If your wireless router supports WPS
――Connection Methods: You can setup the wireless network connection in three ways.
Auto Setup (Using the Auto Network Search function), Manual Setup, WPS(PBC)
116