Using the 
Button
The 
button is used to select stations that broadcast a digital signal.
1.For example, for Channel 
, then 1.
HD indicates the TV is receiving a Digital High Definition signal. SD indicates the TV is receiving a Standard Definition signal.
For quick channel change, press the number buttons, then press the ENTER 
button.
Using the PRE-CH Button to select the Previous Channel
1.Press the
The TV will switch to the last channel viewed.
To quickly switch between two channels that are far apart, tune to one channel, then use the number button to select the second channel. Then use the
Adjusting the Volume
Using the Volume Buttons
1.Press the VOL
or VOL
button to increase or decrease the volume.
Using the MUTE button
At any time, you can cut off the sound using the MUTE button.
1.Press MUTE button and the sound cuts off.
"
" is displayed on the screen.
2.To turn mute off, press the MUTE button again or simply press the VOL
or VOL
button.
Viewing the Display
The display identifies the current channel and the status of certain
1.Press the INFO button on the remote control.
The TV will display the channel, the type of sound, and the status of certain picture and sound settings.
➣Press the INFO button once more or wait approximately 10 seconds and the display disappears automatically.
Viewing the Menus
Air 7
Mono |
|
Picture Mode | : Standard |
Sound Mode | : Custom |
MTS | : Stereo |
: Off | |
Caption | : Off |
5 : 54 pm |
|
1.With the power on, press the MENU button.
The main menu appears on the screen. The menu’s left side has icons: Picture, Sound, Channel, Setup, Input.
2.Press the ▲ or ▼ button to select one of the icons.
Then press the ENTER 
button to access the icon’s
3.Press the EXIT button to exit.
The
TV |
| Picture |
|
Mode |
| : Standard | ► |
Backlight |
|
| 7 |
Contrast |
|
| 95 |
Brightness |
| 45 | |
Sharpness |
| 50 | |
Color |
|
| 50 |
Tint | G 50 |
| R 50 |
▼ More |
|
|
|
Move | Enter | Exit | |
