The screen shows strange colors or just black and white.

 

some keys on the keyboard.

Is the monitor

You may get a blank screen if you boot the

connected using the

system before you connect the DVI cable, or

DVI cable?

disconnect and then reconnect the DVI cable

 

while the system is running as certain types of

 

graphic cards do not send out video signals.

 

Connect the DVI cable and then reboot the

 

system.

Is the screen

Check the signal cable connection. Make sure

displaying only one

the video card is fully inserted in it's slot.

color as if looking at

 

the screen through a

 

cellophane paper?

 

Have the screen colors

Reboot the computer.

become strange after

 

running a program or

 

due to a crash

 

between applications?

 

The screen suddenly has become unbalanced.

Has the video card been set properly?

Have you changed the video card or the driver?

Have you adjusted the resolution or frequency to the monitor?

Set the video card by referring to the video card manual.

Adjust screen image position and size using the MagicTune™ program.

Adjust the resolution and frequency at the video card.

(Refer to the Preset Timing Modes).

The screen is out of focus.

The screen can be unbalanced due to the cycle of the video card signals. Readjust position by referring to the MagicTune™ program.

Have you adjusted the

Adjust the resolution and frequency of the video

resolution or frequency

card.

on the monitor?

(Refer to the Preset Timing Modes).

There are only 16 colors shown on the screen.

The screen colors have changed after changing the video card.

There is a message that reads "Unrecognized monitor, Plug & Play (VESA DDC) monitor found".

Have the Windows colors been set properly?

Has the video card been set properly?

Have you installed the monitor driver?

See the video card manual to see if the Plug & Play (VESA DDC) function can be supported.

Windows ME/2000/XP:

Set the colors properly at the Control Panel →

Display → Settings.

Set the video card by referring to the video card manual.

Install the monitor driver according to the Driver Installation Instructions.

Check when MagicTune™ does not function properly.

MagicTune™ doesn't

MagicTune™ feature is found only on PC (VGA) with Window OS that supports Plug and Play.

Have you changed

*To check whether your PC is available for MagicTune™ feature, follow the

steps below (When Windows is XP);

Control Panel -> Performance and Maintenance - > System -> Hardware -> Device Manager -> Monitors -> After deleting Plug and Play monitor, find 'Plug and Play monitor' by searching new Hardware.

MagicTune™ is an additional software for the monitor. Some graphic cards may not support your monitor. When you have a problem with the graphic card, visit our website to check the compatible graphic card list provided. http://www.samsung.com/monitor/magictune

Download the latest program. The program can