1Preparations
Icons | Description |
|
|
| z Open or close the onscreen display (OSD) menu, or return to the last |
| menu. |
| z OSD control lock: Maintain the current settings, or lock the OSD |
| control to prevent unintended changes to settings. |
| To lock the OSD control, press the MENU button [m ] for five |
| seconds. |
m | To unlock the locked OSD control, press the MENU button [m ] for |
| more than five seconds. |
If the OSD control is locked,
zBrightness, Contrast and 3D can be adjusted, and INFORMATION can be viewed.
zThe function that was configured as Customized Key before locking the OSD control can be used by pressing the [ 
] button.
Confirm a menu selection.
Pressing the [ 
] button when the OSD menu is not displayed will change the input source (Digital/HDMI/DP). If you power on the product or change the input source by pressing the [ 
] button, a message that shows the changed input source will appear at the top left corner of the screen.
Move to the upper or lower menu or adjust the value for an option on the
OSD menu.
Move to the left or right menu or adjust the value for an option on the
OSD menu.
Configure Customized Key and press [
]. The following options will be enabled.
3D - ECO - MAGIC - Image Size
z To configure Customized Key, go to SETUP&RESET →
Customized Key and select the mode you want.
Turn the screen on or off.
The power indicator will be lit when the product is operating normally.
z This is a
z Refer to "10.2 PowerSaver" for details about the
zTo reduce power consumption, it is best to remove the power cable when you will not be using the product for an extended period of time.
1 Preparations 22
