Samsung LT23B551EW/EN manual Mouse. Then try turning your product on, Problem is caused by the box

Other Information

Issues	Solutions and Explanations
Trouble Powering On	Before you turn the product on, find the red light on the right or left bottom of your
	product. Press the power on button on the product or remote and the light should
	blink about 5 times before the product turns on.
	If you find that you are having trouble powering on your Samsung television, there are
	a number of things to check before making a call to the service department.
	•• If you happen to be using the product as a monitor and the stand-by light only
	blinks for a few seconds when you press the power button, your PC is in sleep
	mode. To take your PC out of sleep mode, press a key on your keyboard or move
	the mouse. Then try turning your product on.
	If you’re sure your power cord, remote control, and PC are functioning properly, you
	may be having a cable issue. If you have a cable or satellite box, your product may
	appear to be off because the cable or satellite box is not outputting a signal. To test
	the signal output of your cable or satellite box, press the guide or info button on the
	cable or satellite box remote control. If the screen displays the guide or info data, the
	problem is caused by the box.
Cannot Find a Channel	Re-runSetup (Go to Menu → System → Setup) or run Auto Tuning. (Go to Menu →
	Channel → Auto Tuning).

English - 165