Samsung LT27B551EW/EN, LT23B551EW/EN Anynet+ HDMI-CEC is set to On. System → Anynet+ HDMI-CEC

Other Information

Issues	Solutions and Explanations
MHL Connection
How can I change the size of	The product only supports Screen Fit when you using MHL function.
MHL?
MHL charging seems slow.	The monitor supports 500mA for charging purposes (MHL 1.1). If the mobile device is
	on, charging the product fully takes more time due to battery consumption. Therefore,
	it is recommended turning off the mobile device for faster charging.
There is white space on the	Even though the monitor displays 100% of the screen, since some mobile devices
edge of screen.	transmit a downscaled image, there could be some white space on the monitor. This
	is not a monitor problem but an issue caused by the downscaled image from the
	mobile device. (This issue happens with HCT devices).
When playing a video file,	Some mobile devices do not support the remote control feature. If a monitor cannot
pressing ∂, ∫, †, … buttons	control the mobile device, it is not a monitor problem. Some applications and games
on the remote do not work on	also do not support the remote control feature and this is also not a monitor problem.
mobile devices.
Anynet+ (HDMI-CEC)
Anynet+ does not work.	Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+
	devices only.
	You can connect only one receiver (home theatre).
	Check if the Anynet+ device power cord is properly connected.
	Check the Anynet+ device’s Video/Audio/HDMI cable connections.
	Check whether Anynet+ (HDMI-CEC)is set to On in the Anynet+ setup menu.
	Check whether the product remote control is in product mode.
	Check whether the remote control is Anynet+ compatible.
	Anynet+ doesn’t work in certain situations. (Searching channels, operating Smart Hub
	or Setup, etc.)
	If you have removed and then reconnected the HDMI cable, please make sure to
	search devices again or turn your product off and on again.
I want to start Anynet+.	Check if the Anynet+ device is properly connected to the product and check if the
	Anynet+ (HDMI-CEC) is set to On. (System → Anynet+ (HDMI-CEC))
	Open the Tools menu using your remote and then select Anynet+ (HDMI-CEC). Then
	select a menu you want.
I want to exit Anynet+.	Select View TV in the Anynet+ menu.
	Go to Source screen using your remote and select a non-Anynet+ device.
The message Connecting to	You cannot use the remote control when you are configuring Anynet+ or switching to
Anynet+ device ... appears on	a view mode.
the screen.	Use the remote control after the product has completed Anynet+ configuration or has
	finished switching to Anynet+.

English - 172