![](/images/new-backgrounds/1220375/22037589x1.webp)
Basic Features
Memorising Channels
Aerial
MENU → Broadcasting → Aerial
✎✎Before your television can begin memorising the available channels, you must specify the type of signal source that is connected to the TV.
Auto Tuning
(depending on the country)
MENU → Broadcasting → Auto Tuning → ENTERE
✎✎Automatically allocated programme numbers may not correspond to actual or desired programme numbers. If a channel is locked, the PIN input window appears.
•• Auto Tuning
Aerial (Terrestrial / Cable): Select the aerial source to memorise.
✎✎When selecting Terrestrial, scans for a channel automatically and stores in the TV. Channel Type (Digital & Analogue / Digital / Analogue): Select the channel source to memorise.
Channel Initialisation (Disable / Enable) (UK only): Select whether to clear all channels and set up new channels or to keep existing channels and add new channels.
•• Cable Search Option (when the aerial was set to Cable) (Depending on the country)
Sets additional search options such as the frequency and symbol rate for a cable network search.
•• Standby Auto Tuning
✎✎This function is not available on certain models in specific geographical areas.
••
Schedule timer to turn the TV on and scan channels automatically.
When selecting Cable → Digital & Analogue, Digital
––Operator Selection (depending on the country): Selects a provider of cable services.
––Search Mode: Scans for all channels with active broadcast stations and stores them in the TV.
✎✎If you select Quick, you can set up the Network, Network ID, Frequency, Modulation and Symbol Rate manually by pressing the button on the remote control.
––Network: Selects the Network ID setting mode among Auto or Manual.
•• Network ID: When Network is Manual, you can set up Network ID using the numeric buttons.
•• Frequency: Displays the frequency for the channel (differs in each country).
•• Modulation: Displays available modulation values.
•• Symbol Rate: Displays available symbol rates.
English - 45