2.2 CHAPTERTWO: INSTALLATION
Connecting Cable TV

To connect to a cable TV system, follow the instructions below.

Cable without a Cable Box
1
Plug the incoming cable
into the TV ANTENNA
antenna terminal on
back of the TV.
Because this TVis
cable-ready, you do not need a
cable box to view unscrambled cable
channels.
2
Plug the combiner
into the TV ANTEN-
NA terminal on the
bottom of the rear
panel.
INSTALLATION
Antennas with 75-ohm Round Leads
1
Plug the antenna lead
into the TV ANTENNA
terminal on the bottom
of the back panel.
Separate VHF and UHF Antennas

If you have two separate antennas for your TV (one VHF and one UHF), you must

combine the two antenna signals before connecting the antennas to the TV. This

procedure requires a an optional combiner-adaptor (available at most electronics shops).

1
Connect both antenna
leads to the combiner.