CHAPTERFIVE: PCDISPLAY 5.3

Adjusting the Screen Quality

The purpose of picture quality adjustment is to remove or reduce picture noise. If thenoise is not removed by fine tuning alone, then do the frequency adjustments to theutmost and fine tune again. After the noise has been reduced, re-adjust the picture sothat it is aligned on the center of screen
Press the PC button on the remote control to select the PC mode
1
Press the MENUbutton to
display the menu.
Press the CH button to
select “PC”, then press
the VOL +button.
PC
Move Select Menu
Coarse
Fine
H-Position
V-Position
Color Adjust
Image Recall
Color Recall
2
Press the CH button to
select “Coarse” or “Fine”.
PC
Move Select Menu
Coarse
Fine
H-Position
V-Position
Color Adjust
Image Recall
Color Recall
3
Press the VOL + or VOL -
button to adjust the
screen quality, vertical
stripes appear or the pic-
ture may be blurry.
4
When you are satisfied with the settings, press the MENUbut-
ton repeatedly to return to normal viewing.
PC DISPLAY
Coarse 1043
Adjust Exit
<Adjusting the Coarse>
Fine 1043
Adjust Exit
<Adjusting the Fine>