English-59
How to connect the cables and stand base
Do NOT lift the TV set by the stand.
The stand is not screwed to the TV set and
lifting the set by the stand may cause injury.
Remove the cover as shown in
the picture.
1Connect the cables as shown in
the picture.
2
Replace the cover.
3Attach the stand to the
TV set as shown in the picture.
Note : The curved side of the stand base should be
placed at the back of the TV set as shown in
the above figure.
4
Colors may vary depending on the model you purchase
.
04-BN68-00437D-01Eng 2/9/04 3:25 AM Page 59