Plug & Play
When the set is initially powered ON, you are automatically presented with a series of basic customer settings.
The following settings are available.
1 | If the set is in standby mode, press the | POWER button |
| on the remote control. |
|
Result: The message Plug & Play is displayed.
It appears for a little while, and then the Language menu is automatically displayed.
2 Select the appropriate Language by pressing the 
or 
button.
The available languages are listed.
You can choose one of 12 languages.
3Press the ENTER
button to confirm your choice.
Result: The message “Check antenna input.” is displayed with
OK selected.
4Press the ENTER
button.
Result: The country menu is displayed:
Belgium - Germany - Spain - France - Italy -
Netherlands - Switzerland - Sweden - United
Kingdom - Eastern Europe - Others
5 Select your Country by pressing the 
or 
button. Press the ENTER
button.
Result: The Auto Store menu is displayed.
6 Press the ENTER
button.
Result: The channel search will start and end automatically.
To stop the search before it has finished, press the
ENTER
button with Stop selected.
7Press the ENTER
button.
Select the Hour or Minute by pressing the 
or 
button. Set the Hour or Minute by pressing the 
or 
button. (Refer to “Setting the Clock” on page 30)
8 Press the MENU button to confirm your setting.
Result: The message “Enjoy your viewing” is displayed, and then the channel which has been stored will be activated.
9Press the EXIT button to exit.
