Timer Function

The timer enables you to switch the system on or off at specific times.

Example: You wish to wake up to music every morning.

If you no longer want the system to be switched on or off auto- matically, you must cancel the timer.

Before setting the timer, check that the current time is cor- rect.

For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.

1

Switch the system on by pressing Standby/On.

2

Press Timer/Clock until

TIMER is displayed.

3

Press Enter.

 

Result: ON TIME is displayed (instead of the equalizer symbols) for a few seconds, followed by any switch-on time already set; you can set the timer switch-on time.

4 Set the timer switch-on time.

aSet the hour by pressing the / buttons.

bPress Enter.

Result: The minutes flash.

cSet the minutes by pressing the / buttons.

dPress Enter.

Result: OFF TIME is displayed (instead of the equalizer sym- bols) for a few seconds, followed by any switch-off time already set; you can now set the timer switch-off time.

5 Set the timer switch-off time.

aSet the hour by pressing the / buttons.

bPress Enter.

Result: The minutes flash.

cSet the minutes by pressing the / buttons.

dPress Enter.

Result: VOL XX is displayed, where XX corresponds to the vol- ume already set.

6 Press Tuning Down and Up to adjust the volume level and press

Enter.

Result: The source to be selected is displayed.

7

pressing the

 

 

/

 

buttons to select the source to be played

 

 

 

 

 

 

 

 

when the system switches on .

 

 

 

 

 

 

 

 

If you select...

 

 

You must also...

 

TAPE (cassette)

 

 

Insert a recorded cassette in one of the

 

 

 

 

 

 

decks before setting the system to stand-

 

 

 

 

 

 

by.

 

TUNER (radio)

 

 

a Press Enter.

bSelect a preset station by pressing the

/ buttons.

 

CD (compact disc)

Load one or more compact discs.

8

Press Enter to confirm the timer.

9

Press Standby/On to set the system to standby mode.

 

Result:

appears on the front panel display next to the time, indi-

cating the timer has been set. The timer automatically turns the system on or off at a designated time.

GB

If the timer switch on and off times are identical, the word ERROR is displayed.

2 3,4,5,6,7,8

4,5,6,7

1,9

4,5,6,7

To set the timer function

You can also use Program/Set button on the remote control to instead Enter button in step 3,4,5,6,7,8.

19