Samsung MAXB450RH/XEF Listening to a Compact Disc, Loading and Changing Compact Discs, To play

Switch the system on by pressing Standby/on.

Loading and Changing Compact Discs

GB

The CD disc changer can contain up to three 12 cm or 8 cm compact discs without using an adapter.

Never force the compact disc carrousel when opening and clos- ing the compartment.

Never press down or place objects on the carrousel.

Always treat your compact discs with care; refer, if necessary, to the section entitled “Precautions When Using Compact Discs” on page 23.

1	Switch the system on by pressing Standby/on.
2	Press the Open/Close(	) button on the front panel.
	Result: The compartment opens.

3 Place one or two discs in the front slots of the carrousel, with the label on the discs facing upwards.

Check that the compact disc has been correctly inserted in the holder before closing the compartment.

4	If you wish to load a third compact disc, press the Disc Change but-
	ton on the front panel (or Disc Skip on the remote control).
	Result: The carrousel rotates by 120°.
5	Close the compartment by pressing the Open/Close(	) button
	again.

If you wish to start playing a disc directly, you can also proceed as follows.

To play...	Press...
Disc 1	CD (	) or Disc 1
Disc 2	Disc 2
Disc 3	Disc 3

Result: The compartment closes automatically and the disc selected starts playing.

6 To change or unload the compact disc changer, repeat Steps 2 to 5.

Keep the compartment closed whenever you are not using it, to prevent dust from entering.

You can load or unload compact discs when the radio, tape or auxiliary source function is selected.

	2,5
5	4
5
1

Listening to a Compact Disc

This unit has been designed to playback the CDs: Audio CD, CD Text, CD-R and CD-RW.

When you have loaded at least one compact disc into the player, you can start listening to it.

Continued use of irregular shape CDs (heart-shape, octagonal, etc.) can damage the unit.

1

2	Select the CD function by pressing CD (			) .
3	Load one or more discs.
4	Press CD (	) on the front panel or	on the remote control.
	If you have loaded more than one compact disc, they will
	be played in turn.
5	Adjust the volume as required by:
	Turning the Volume knob on the front panel
	or
	Pressing the VOL. + or - buttons on the remote control
6	To pause temporarily during playback, press CD (				).

Press CD ( ) again to continue disc playback.

7 Press when you have finished.

When playing a disc, you can load new discs without stopping the current one. To do so, open the compartment by pressing Disc Change and load new discs in the other two vacant slots (not the one containing the disc that you are play- ing). You cannot rotate the carrousel during playback.

When no discs are loaded, the “NO DISC” indication is dis- played.

The CD player stops automatically after playing the three discs, if the CD REPEAT function has not been selected.

5

2,4,6

7

1

When playing a CD-R or CD-RW

User-edited CD-Rs (Recordable)and CD-RWs (Rewritable) can be played back only if they are already “finalized”.

You can play back your original CD-Rs or CD-RWs recored in music CD format.(However,they may be played back depending on their characteristics or recording conditions.)

Before playing back CD-Rs or CD-RWs, read their instructions or caution carefully.

Some CD-Rs or CD-RWs may not be played back on this unit because of their disc characteristics, damage or stain on them,or if the player’s lens is dirty.

CD-RWs may require a longer readout time.(This is cause by the fact that reflectance of CD-RWs is lower than for regular CDs.)

10