![](/images/new-backgrounds/1226722/22672271x1.webp)
Copying a Cassette (Dubbing)
GB
You can copy a cassette from Deck 1 to Deck 2. Two options are available:
Normal speed dubbing
You do not need to adjust the volume, as it has no effect on the recording.
Take care not to insert the tape to be copied in Deck 2, as it will be erased when you start recording.
1 | Switch your system on by pressing On/Standby. | |||||
2 | Insert a blank cassette in Deck 2. |
| ||||
3 | Insert the tape to be copied in Deck 1. | |||||
4 |
|
|
|
|
| |
To copy a cassette at... | Press... | |||||
| Normal speed | Normal | ||||
| High speed | |||||
| Result: The appropriate indications are displayed and the cassette in | |||||
|
| Deck 1 is copied to the cassette in Deck 2. | ||||
5 | Press |
| on the front panel or |
|
| for each deck on the remote con- |
|
| |||||
|
| |||||
| trol when you have finished recording. | |||||
|
|
|
|
|
|
|
1
5
4
Selecting the Cassette Playback Mode (Deck 2 Only)
Your
Press REV. Mode until the appropriate symbol is displayed.
When the display indicates... The
One side of the selected cassette and then stops.
One side of the cassette.
The other side of the cassette and then stops.
Both sides of the cassette indefinitely until you press stop.
Tape Counter
When playing a cassette in one of the cassette decks, a counter is displayed to enable you to take note of the counter value at the start of each track to start playback at the begin- ning of the track to which you wish to listen.
Before starting to record a cassette for which you wish to take note of the counter values at the beginning of each track, reset the counter by pressing Counter Reset on the front panel.
Each cassette deck has a separate counter.
36