Connecting the AM (MW) Aerial
The AM aerial (for long and medium waves) can be:
Placed on a stable surface
Fixed to the wall (you must first remove the base)
The AM aerial connector terminals are located on the rear of the system and are marked AM .
To avoid noise interference, check that the loudspeaker wires do not run |
|
|
close to the aerial wires. |
|
|
Always keep them at least 2 inches (5 cm) away. |
| PRE OUT |
|
| SUB |
| AM ANT. | WOOFER |
|
|
OUT
VIDEO
OUT
CENTER SPEAKER |
(6‰ ) |
L |
SURROUND |
SPEAKER |
(6‰ ) |
R |
GB
FM 75‰
AM ANT.
DIGITAL OUT
OPTICAL
LINE OUT
AUX IN
FRONT
SPEAKERS
(6Ω )
Connecting the FM Aerial
How to connect a COAXIAL TYPE aerial.
Connect a 75Ω antenna to the FM antenna terminal.
Plug the connector on the FM aerial supplied into the coaxial socket (75Ω ) marked FM on the rear of the system.
Follow the instructions given on Page 24 to tune into a radio station, and determine the best position for the aerial.
If reception is poor, you may need to install an outdoor aerial.
To do so, connect an outdoor FM aerial to the FM socket on the rear of the system using a 75Ω coaxial cable (not supplied).
SUB
WOOFER
PRE OUT
SUB
WOOFER
PRE OUT
11
