Samsung ML-1210, ML-1200 specifications Main Board and Sensor Board

Disassembly and Reassembly

3-10 Main Board and Sensor Board

1.Before you remove the main board, you should remove:

•Main Cover (see [3-1 Main Cover])

•SMPS board (see [3-9 SMPS Board])

2.Remove two screws from the main board and unplug all of connectors, then remove the board.

3.Release four snap-fits securing the insulator engine board and then remove the insulator.

Main B’d

4. Release four snap-fits securing the sensor board and then remove the sensor board.

Samsung Electronics 3-7