Samsung ML-1520 Cancel button, Description, Function, Printing demo page, Manual feeding, printer

LED Description

If the On Line/Error and Toner Save LEDs blink, your system has some problems. To solve the problem, see “Troubleshooting Error Messages” on page 6.18

Cancel button

1

Function	Description
Printing demo page	In Ready mode, press and hold this button for about 2
	seconds until all LEDs blink slowly, and release.
Manual feeding	Press this button each time you load a sheet of paper in the
	manual feeder, when you select Manual Feed for Source
	from your software application. For detailed information,
	see “Using the Manual Feeder” on page 3.8.
Cleaning inside	In Ready mode, press and hold this button for about 10
printer	seconds until all LEDs turn on, and release. After cleaning
	the printer, one cleaning sheet is printed.
Canceling print job	Press this button during printing. The On Line/Error LED
	blinks while the print job is cleared from both the printer
	and the computer, and then return to Ready mode. This
	may take some time depending on the size of the print job.
	In Manual Feed mode, you can’t cancel the print job by
	pressing this button. For detailed information, see “Using
	the Manual Feeder” on page 3.8.
Toner Save mode	In Ready mode, press this button to turn the Toner Save
on/off	mode on or off.
	For detailed information, see page 4.8.

INTRODUCTION 1.7