Samsung ML-1710 manual Text is wrong, But are blank Defective or out Toner

Problem	Possible Cause	Solution
The paper	There is too much	Remove excess paper from the tray.
keeps	paper in the paper	If printing on special materials, use the
jamming.	tray.	manual feeder.
	An incorrect type of	Use only paper that meets the
	paper is being used.	specifications required by the printer.
	An incorrect output	Special print materials, such as thick
	method is being used.	paper, should not be printed using the top
		output tray (face-down). Use the rear
		output tray (face-up) instead.
	There may be debris	Open the front cover and remove the
	inside the machine.	debris.
The printer	The printer cable is	Disconnect the printer cable and
prints, but the	loose or defective.	reconnect. Try a print job that you have
text is wrong,		already printed successfully. If possible,
garbled, or		attach the cable and printer to another
incomplete.		computer and try a print job that you
		know works. Finally, try a new printer
		cable.
			6
	The wrong printer	Check the application’s printer selection
	driver was selected.	menu to ensure that your printer is
		selected.
	The software	Try printing a job from another
	application is	application.
	malfunctioning.
Pages print,	The toner cartridge is	Redistribute the toner, if necessary. See
but are blank.	defective or out of	page 5.3.
	toner.	If necessary, replace the toner cartridge.
	The file may have	Check the file to ensure it does not
	blank pages.	contain blank pages.
	Some parts, such as	Contact a service representative.
	the controller or the
	board, may be
	defective.

SOLVING PROBLEMS 6.5