DISASSEMBLE CANOPY AND MOTOR COVERS
Step 10. Remove the screws from the canopy cover and |
|
the motor cover and set aside for later use. | MOTOR |
| COVER |
CANOPY
COVER
INSTALL CANOPY COVER
Step 11. Take the two pieces of the canopy cover and assemble them around the downrod as shown. Using the four screws removed in Step 10, assemble the canopy cover.
Slide the canopy cover to the ceiling and secure to the downrod using the two provided screws. Tighten by hand only.
CANOPY
COVER
SCREWS FROM
STEP 10 
CAUTION: The canopy cover can NOT be used on sloped ceilings.
PROVIDED
SCREWS
INSTALL MOTOR COVER
Step 12. Take the two pieces of the motor cover and assemble them around the downrod as shown. Using the two screws removed in Step 10, assemble the motor cover.
Slide the motor cover down onto the top of the fan and secure to the downrod using the two provided screws.
Using the screwdriver, tighten securely by hand only.
SCREWS FROM
STEP 10
PROVIDED
SCREWS
8
