WHITE
W-84 Wall Control Bezel replacement: -
CONTINUED
BEZEL
Step 1c. Locate the rubber key pad attached to the four (4) locating pins and remove rubber key pad from the WHITE bezel, also as shown in Figure #3.
LOCATING
PINS
HOLES(4)
RUBBER KEY
PAD
LOCATING
PINS (4)
Figure #3
Step 1d. Reinstall the rubber key pad on to the four (4) locating pins located on the almond bezel as shown in Figure #4.
ALMOND
BEZEL
RUBBER KEY
PAD
Step 1e. Before attaching the bezel back onto the front of the switch, make sure that the rubber key pad is attached to the locating pins on the bezel as shown in Figure #5.
Figure #4
RUBBER KEY
PAD
ALMOND | LOCATING |
BEZEL | PINS |
| (4) |
| Figure #5 |
20
