![](/images/new-backgrounds/1100372/10037241x1.webp)
W-84 Wall Control Bezel replacement: - CONTINUED
Step 1e. To attach the bezel back on to the front of the switch you will need to align the four (4) tabs on the bezel with the front of the wall control and by gently pressing on both top and bottom of the bezel at the same time, snap the bezel back on to the front of the switch as shown in both figures #6.
Step 1f.
ALMOND
COLORED
BEZEL
BEZEL
BEZEL
TABS
BEZEL
ALIGNMENT
PIN AND HOLE
Figure #6
ALMOND
WALL PLATE
SCREWS
ALMOND
COLORED
WALL PLATE
Figure #7
21