Media and tray 37
2. Menu overview and basic setup
The settings set from the machine’s driver override the
settings on the control panel.
a To print from an application, open an application and start
the print menu.
b Open Printing Preferences (see "Opening printing
preferences" on page 19).
c Press the Paper tab in Printing Preferences and select an
appropriate paper type.
For example, if you want to use a label, set the paper type
to Label.
d Select MP Tray in paper source, then press OK.
e Start printing in application.

4

Printing on special media

The table below shows the special media usable in each tray.

The media types are shown in the Printing Preferences. Select the

proper media type to get the highest printing quality.

When using special media, we recommend you feed one
sheet at a time (see "Print media specifications" on page 4).
Printing the special media (Face up)
If special media are printed out with curl, wrinkles, crease,
or black bold lines, open the rear cover and pull down the
pressure lever as shown below and try printing again.
Keep the rear cover opened during printing.

To see for paper weights for each sheet, refer to "Print media

specifications" on page 4.

Types Tray 1 Optional
tray Multi-purpose tray
Plain ?? ?
Thick ?? ?