Samsung ML-4600 manual Guidelines for Using Paper

Paper Specifications

Guidelines for Using Paper

For best results, use conventional 90 g/m2 (24 lb) paper. Make sure the paper is of good quality, and free of cuts, nicks, tears, spots, loose particles, dust, wrinkles, voids, and curled or bent edges.

If you are unsure of what type of paper you are loading (such as bond or recycled), check the label on the package of the paper.

The following problems with paper cause print quality deviations, jamming, or even damage to the printer.

Symptom	Problem with Paper	Solution
Poor print quality or	Too moist, too rough, too	Try another kind of paper,
toner adhesion	smooth, or embossed;	between 100 ~ 250 Sheffield,
Problems with feeding	faulty paper lot	4 ~ 5 % moisture content.
Dropout, jamming,	Stored improperly	Store paper flat in its moisture-
curl		proof wrapping.
Increased gray	Too heavy	Use lighter paper, open the rear
background shading		output tray.
/printer wear
Excessive curl	Too moist, wrong grain	• Open the rear output tray.
problems with feeding	direction or short-grain	• Use long-grain paper.
	construction
Jamming, damage to	Cutouts or perforations	Do not use paper with cutouts or
printer		perforations.
Problems with feeding	Ragged edges	Use good quality paper

Notes:

•Do not use letterhead paper that is printed with low-temperature inks, such as those used in some types of thermography.

•Do not use raised or embossed letterhead.

•The printer uses heat and pressure to fuse toner to the paper. Make sure that any colored paper or preprinted forms use inks that are compatible with this fusing temperature (200 °C or 392 °F for 0.1 second).

A.4 APPENDIX