Samsung ML-4600 Try printing a job from another, Text is wrong Is malfunctioning Application

Solving General Printing Problems

Problem	Possible Cause	Solution
The printer prints, but	The software application	Try printing a job from another
the text is wrong,	is malfunctioning.	application.
garbled, or incomplete.
	The operating system is	If printing from Windows (any
(continued)
	malfunctioning.	version), exit to a Dos prompt and
		verify functionality with the following
		command: At the C:\ prompt, type
		dir LPT1, then press Enter. (This
		assumes you are connected to
		LPT1.) Exit Windows and reboot the
		computer. Turn the printer off and
		then back on again.
Pages print, but are	The toner cartridge is	Replace the toner cartridge.
totally blank.	defective or out of toner.
	The file may have blank	Check the file to make sure that it
	pages.	does not contain blank pages.
	Some parts, such as the	Contact a service representative.
	controller, the board,
	may be defective.
Illustrations will not	The setting in the	Print the document with the Bitmap
print correctly when	software application is	Printing checkbox in the Print dialog
using Adobe Illustrator.	wrong.	box empty.

PROBLEM SOLVING 7.5