Setting the Clock

For each step, you have a few seconds to set the required option. If you exceed this time, you must start again.

1.Switch the system on by pressing the POWER button.

2.Press and hold the TIMER/CLOCK button and then press the ENTER button.

Result: "CLOCK" is displayed.

3.Press ENTER.

Result: The hour flashes.

Decrease the hours:

Increase the hours:

4.When the correct hour is displayed, press

ENTER.

Result: The minutes flashes.

Decrease the minutes:

Increase the minutes:

5.When the correct minute is displayed, press

ENTER.

Result: " TIME" appears in the display.

The current time is now set.

NOTE

You can display the time, even when you are using another function, by pressing and holding the TIMER/CLOCK button once.

You can also use # or $ on the front panel instead of buttons in steps 3 and 4.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

04

 

 

 

 

 

 

 

 

 

 

 

Basic

Timer Function

 

 

Before setting the timer, check that the current time

Functions

The timer enables you to switch the system on or off

 

 

at specific times automatically.

 

 

 

is correct.

 

 

For each step, you have a few seconds to set the required

 

 

 

option. If you exceed this time, you must start again.

 

 

If you no longer want the system to be switched on

 

 

 

or off automatically, you must cancel the timer.

 

 

Example: You wish to wake up to music every morning.

1.Switch the system on by pressing the POWER button.

2.Press and hold the TIMER/CLOCK button and

then press ◄ or ► buttons until TIME is displayed.

3. Press the ENTER ( ) button.

Result: ON is displayed for a few seconds. You can set the timer switch-on time.

4.Set the timer switch-on time.

aPress the ◄ or ► button.

b Press the ENTER ( ) button. Result: The minutes flash.

cPress the ◄ or ► button.

d Press the ENTER ( ) button.

Result: OFF is displayed for a few seconds. You can now set the timer switch-off time.

5.Set the timer switch-off time.

aPress the ◄ or ► button.

b Press the ENTER ( ) button. Result: The minutes flash.

cPress the ◄ or ► button.

d Press the ENTER ( ) button.

Result: VOL XX is displayed, where XX corresponds to the volume already set.

6.Press ◄ or ► button to adjust the volume level

and press the ENTER ( ) button.

Result: The source to be selected is displayed.

7.Press the ◄ or ► button to select the desired source to be played when the system switches on.

FM (radio) : a Press the ENTER (

 

 

) button.

 

 

bSelect a preset station by pressing the ◄ or ► button.

DVD/CD (compact disc): Load one compact disc.

USB : Connect the USB device.

English 31

MM-D470D-ENG-ZA-0608.indd

31

2011-6-24

8:45:23

Page 31
Image 31
Samsung MM-D470D user manual Setting the Clock, Timer Function