Samsung MP-43 manual FM Radio, Operating your radio - Search tuning FM

Operating your radio - Search tuning FM

1.Fully extend the telescopic aerial.

2.Press the On / Standby button to switch on your sound system.

3.Press and release the Radio button until the FM band is selected.

4.Press and release the Auto-tune button to cause your radio to scan in the direction previously scanned and stop automatically when it finds a station of sufficient strength.

5.After a few seconds the display will update. The display will show the frequency of the signal found. If the signal is strong enough and there is RDS data present then the radio will display the station name.

6.To find additional stations press and release the Auto-tune button as before.

7.To scan the FM band in a opposite direction press and release either the Up Tuning button (to scan low frequency to high frequency) or the Down Tuning button (to scan high frequency to low frequency) and then press the Auto-tune button again.

8.When the end of the waveband is reached your radio will recommence tuning from the opposite end.

9.Adjust the Volume to the required setting.

10.To switch off your radio press the On / Standby button.

2

3

4,6,7

7 7

9 9

FM Radio

FM

If you need any further advice, please call our Technical Helpline on :-	19
020 8758 0338 (Mon-Fri)