5 Select Internet Protocol Version 4 (TCP/IPv4) from the Networking tab and click Properties.
6 Configure the IP settings.
When using DHCP, select Obtain an IP address automatically. To use a static IP address, select Use the following IP address, and set the IP address manually.
■ The LAN device driver may differ depending on
|
| your LAN device model. |
Note | ■ | To add a network component, click Install in the |
| screen shown in the figure above. You can add | |
|
| |
|
| clients, services, and protocols. |
Note
When not using DHCP, ask your network administrator for the IP address.
7 When you have completed the settings, click the OK button.
The network settings have been completed.
90
