Samsung NP915S3G-K01US user manual Charging the Battery, Status Charge LED

Battery

Please refer to the following instructions when running the computer on battery power without connecting the AC power.

This computer is equipped with an internal battery.

Precautions

•• Users cannot remove or replace the internal battery.

•• To remove or replace the battery, use an authorized service center in order to protect the product and users. You will be charged for this service.

•• Use only chargers specified in the User Manual.

•• Never heat the battery pack, put it near or in a fire or use at a temperature higher than 60°C, as this may cause fire.

•• Please refer to the system operation environment of this manual and operate and store the battery at room temperature.

•• Before using the computer for the first time, make sure to connect the AC adapter and charge the battery completely.

•• The images used for the illustration are of a representative model, therefore the images may differ from the the actual product.

The location of the internal battery

Chapter 4. 100

Settings and Upgrade

Charging the Battery

1 Connect the AC adapter to the power input jack of the computer. The battery will start charging.

2 When charging is complete, the Charge LED turns green.

Status	Charge LED
Charging		Red or orange
Charging complete		Green
AC adapter not		Off
connected