Samsung NX-series, NX 10 user manual Using the OIS in the menu option

Using the OIS in the menu option

After setting the OIS switch, select the OIS function in the menu option

1In Shooting mode, press [MENU].

2Select Shooting3 (3/3) → OIS → an option.

• The OIS function may not work well in the following
situations:
-	When you take a picture while tracing a moving
	object
-	When a big vibration occurs beyond the range of
	stabilization
-	When the shutter speed is too slow due to a

36

OIS	Mode 1	The OIS function is applied only when
		pressing the shutter in full or half.
OIS	Mode 2	The OIS function is always applied.

circumstance like night shooting

- When the battery capacity is not sufficient

- When you are shooting a close-up shot

• When you use a tripod, please disable the OIS

function since the image can be shaken due to the

vibration of OIS function.

• If the camera is struck or dropped while you are

taking a picture, the display can be impaired. If this

occurs, turn the camera off and then on, and the

camera should operate normally again.

• Since the battery consumption can increase along

with the use of OIS function, it is recommended to

use the function only if needed.

• To set the OIS function by using the menu, set

[OIS] of lens to ON. This function may not operate

depending on the lens model.

• The function can be set directly by pressing [Fn] in

the shooting mode.