Samsung NX-series, NX 10 user manual Using an external flash unit, Purchased separately

Taking a picture in a dark place

	Using an external flash unit			The available flash modes
	(purchased separately)		The flash modes available are determined by the
			camera lens or camera exposure mode you are using.
	You can use the A-TTL auto flash mode when you		1		Smart Flash Mode
	attach an external flash unit (SEF20A or SEF42A) to the
					• The camera automatically adjusts the brightness
	camera.				of the flash according to amount of light in the
	This section of the user manual was prepared based on		2		surrounding environment.
	the model SEF20A flash.				Auto
	For more details about the external flash units, see the				• The flash operates automatically in dim or dark
					light.
58	flash units user’s manual.		3
					Auto + Red
		Installing the flash			• The flash operates automatically in dim or dark
			4		light and prevents the red-eye effect.
					Fill in

1Install the external flash after removing the hot shoe cover.

2Turn on the external flash.

•The burst mode of external flash is set to the TTL auto mode.

3Make sure the external flash is fully charged, and then start shooting.

•The flash operates whenever you take a picture and its brightness is controlled automatically.

5Fill-in Red

•Always operates the flash light, and prevents the red-eye effect.

61st Curtain

•The flash operates immediately after the shutter opens.

72nd Curtain

•The flash operates just before the shutter closes.

•Only a flash device manufactured for the NX series automatically adjusts the brightness of the flash. To enjoy the auto mode functions, please use the flash manufactured for NX models. Although the flash fires without the battery being fully charged, we recommend using the flash only after you charge the battery fully.

•If an external flash unit has a flash control function, the light control value of the external flash is applied when you connect it to the camera.