Samsung NX 10 Adjusting the amount of flash light, Select Shooting 2 2 → Flash, Desired item

Taking a picture in a dark place

Adjusting the amount of flash light	• If the subject is too close, the ISO sensitivity is
	high, or the exposure value is too large or small,
When setting a flash option, you can adjust the	the adjustment effect will be reduced.

brightness of the flash.

1	In the Shooting mode, press [MENU].
2	Select Shooting 2 ( 2) → Flash.
3	Press the [Fn] button after selecting a
57	desired item.

4Adjust the brightness of the fl ash by rotating the dial or pressing [W / X].

•You can adjust flash brightness by ±2 levels.

1 Flash Exposure Value

		0			Display
	-1		+1
					the level of
	-2		+2		flash light
					adjustment
MENU Back				Reset

•The Flash Brightness Adjustment function is not available in some shooting modes.

•If an external flash unit has a flash control function, the light control value of the external flash is applied when you connect it to the camera.

•If the distance from the subject is quite close when taking images by using the built-in flash, part of the images may appear dark as the lens is interfered with the flash light. Please check the distance between camera and subject when taking pictures. The distance interfered with flash light may vary by the type of lens in use.

•If you've installed a lens hood, the hood can block light from the built-in flash. Please remove the lens hood when using the built-in flash.