FastTrak100 User Manual
Rebuilding An Array
This command effectively copies or overwrites data from an existing data drive in the array on to a blank drive. The operation will be typically used when a failed drive has been replaced with a new drive as part of a mirrored array.
1.To perform a Rebuild, choose the Array Tab View.
2.Right click the array number and choose Rebuild from the context menu.
3.Once Rebuild is selected, you will be asked to “Initialize Rebuild process on Array #” by clicking OK.
Using Rebuild Wizard
1.Initiating rebuild array will open the Rebuild Wizard Step 1 screen shown below.
2.Select the Target drive which will receive data. Make sure you select the blank new or replacement drive. The unselected drive will contain “good” data. It will be the remaining working drive of an array, or a system drive containing existing data that you wish to mirror.
WARNING: Make absolutely sure and
3.Click the Next button to proceed to Rebuild Wizard Step 2 (see next page) or Cancel button to stop.
52
