FastTrak100 User Manual
Navigating the FastBuild™ Setup Menu
When using the menus, these are some of the basic navigation tips: Arrow keys highlights through choices; [Space] bar key allows to cycle through options; [Enter] key selects an option; [ESC] key is used to abort or exit the current menu.
Using the Main Menu
This is the first option screen when entering the FastBuildT M Setup.
FastBuild (tm) Utility 1.xx (c)
[ Main Menu ]
Auto Setup | [ 1 ] |
View Drive Assignments | [ 2 ] |
Define Array | [ 3 ] |
Delete Array | [ 4 ] |
Rebuild Array | [ 5 ] |
Controller Configuration | [ 6 ] |
| [ Keys Available ] |
Press 1... | 6 to Select Option [ESC] Exit |
To create a new array automatically, follow the steps under “Creating Arrays Automatically” on page 17. Promise recommends this option for most users.
To manually create an array or define an array as bootable, follow the steps under “Manually Creating Arrays” on page 22. You will need to manually create an array if you wish to modify block size.
To view drives assigned to arrays, see “Viewing Drive Assignments” on page 21.
To delete an array (but not delete the data contained on the array), select “Deleting An Array” on page 28.
To rebuild a mirrored array, see “Rebuilding an Array” on page 30.
To view controller settings, see “Viewing Controller Configuration” on page 32.
NOTE: After installing the FastTrak100 card and configuring an array using FastBuild, you should FDISK and format the arrayed drive(s) if you are using new, blank drives.
18
