FastTrak100 User Manual
Viewing Controller Settings
The Controller Configuration <6> menu selection allows you to enable or disable the FastTrak100 BIOS from halting (the default) if it detects an error on boot up. You may also view the system resources (Interrupt and I/O port address) of FastTrak’s data channels.
FastBuild (tm) Utility 1.xx (c)
[ Adapter Configuration - Options ]
| Halt On Error: | Enable |
|
| [ System Resources Configuration ] | ||
Channel 1 (IDE1) | Interrupt : A | I/O Port : FFF0 | |
Channel 2 (IDE2) | Interrupt : A | I/O Port : FFA8 | |
[ Keys Available ]
[←, →, Space] Change Option [ESC] Exit
Halting FastTrak BIOS On Bootup Errors
The [Adapter Configuration – Options] section allows you to enable or disable FastTrak100 to Halt operation at the BIOS startup screen should an error be detected. This is the only option that can be changed on this screen.
Viewing FastTrak System Resources
The [System Resources Configuration] section of this submenu displays the PCI slot interrupt and port address used by the FastTrak100. The resources used are determined by the Mainboard PCI PnP BIOS for the PCI slot in which the FastTrak100 resides.
In the rare case that there is a resource conflict, refer to the Mainboard BIOS documentation on changes on resources allocated to the FastTrak100 PCI slot.
32
