Press MENU/OK on the handset. Select [Services] > [Register].
Press and hold on the base station for 5 seconds, then press MENU/OK to confirm.
Enter the system PIN/passcode. Press REDIAL/C to make corrections. Press MENU/OK to confirm the PIN/passcode.

Register additional handsets

You can register additional handsets to the base station.The base station can register up to 3 handsets.

1

2

3

4

Note

•• For models with an answering machine, you hear a confirmation beep.

»»Registration is complete in less than 2 minutes.The base automatically assigns a handset number to the handset.

Note

•• If the PIN/passcode is incorrect or no base is found within a certain period, your handset displays a notification message. Repeat the above procedure if registration fails.

Note

•• The preset PIN/passcode is 0000. No change can be made on it.

Unregister the handsets

1 If two handsets share the same base station, you can unregister a handset with another handset.

2 Press MENU/OK.

3 Select [Services] > [Unregister], then press MENU/OK to confirm.

4 Enter the system PIN/passcode. (The preset PIN/passcode is 0000). Press REDIAL/C to remove the number.

5 Select the handset number to be unregistered.

6 Press MENU/OK to confirm.

»»The handset is unregistered.

Tip

•• The handset number displays beside the handset name in standby mode.

Restore default settings

You can reset your phone settings to the

original factory settings.

1

Press MENU/OK.

2

Select [Services] > [Reset], then press

 

MENU/OK to confirm.

 

»»The handset displays a confirmation

3

request.

Press MENU/OK to confirm.

 

»»All settings except the phonebook are

 

reset.

EN 25

Page 27
Image 27
Philips M555, M550 manual Register additional handsets, Unregister the handsets, Restore default settings