Tip
•• The message counter is displayed on the first line (while the date is displayed on the second line). It indicates the current message you are viewing against the total number of messages you received.
Delete an incoming message
1 When you listen to the message, press MENU/OK to enter the options menu.
2 Select [Delete], then press MENU/OK to confirm.
»»The current message is deleted.
Delete all old incoming messages
1 Press MENU/OK.
2 Select [Answ. Machine] > [Delete all], then press MENU/OK to confirm.
»»The handset displays a confirmation request.
3 Press MENU/OK to confirm.
»»All old messages are permanently deleted.
Note
•• You can delete the read messages only. No deleted messages can be recovered.
Set the ring delay
You can set the number of times the phone rings before the answering machine picks up the call.
1
2
3
»»The setting is saved.
Note
•• Make sure that the answering machine is switched on before this feature can be applied.
Tip
•• When you access the answering machine remotely, you are recommended to set the ring delay to [Toll saver] mode.This is a cost effective way to manage your messages.When there are new messages, the answering machine picks up the call after 3 rings;When there is no messages, it picks up the call after 5 rings.
Remote access
You can operate your answering machine when you are away from home. Simply make a call to your phone with a touch tone phone and enter your
Note
•• The remote access PIN code is the same as your system PIN.The preset PIN is 0000.
Activate/deactivate the remote access
You can allow or block remote access to the answering machine.
1 Press MENU/OK.
2 Select [Answ. Machine] > [Remote access], then press MENU/OK to confirm.
3 Select [Activate]/[Deactivate], then press
MENU/OK to confirm. »»The setting is saved.
Change the PIN/passcode
1 Press MENU/OK.
22EN
