TROUBLE SHOOTING
Symptom | Possible Solutions |
|
|
Display Window | Make sure the machine is plugged in. If nothing appears in |
shows nothing | the Display Window, unplug and plug in again. |
YOUR BREADMAN® | 3. | 2. | 1. |
4. | |||
5. |
|
|
|
6.
START Button doesn’t start the machine
Make sure the machine is plugged in.
If nothing appears in the Display Window, press SELECT to choose your Baking Cycle. (You must select a Baking Cycle before pressing START.)
If the baking area is too hot, the Breadman® will not start because of an automatic safety feature. Remove the Bread Pan with your ingredients, and wait until the Breadman® cools down — about 20 minutes — before starting a new loaf.
7.
Can’t set the Timer | If you selected either the Rapid Bake or Dough Cycle, |
| you should not use the Timer. This is because the |
| ingredients should be processed immediately for |
| these cycles. |
|
|
After starting, the | If the Bread Machine is too hot, it will not start because |
Display Window | of an automatic safety feature. |
flashes | Remove the Pan and let the Bread Machine cool down |
| until |
| You may then start the cycle. |
|
|
The Bread Machine | On preheating the colon (:) in the Time Display flashes |
doesn’t mix the | and the Kneading Paddle will not move. There is a 4 - 5 |
ingredients | min. rest period on some of the cycles in which there will |
| be no movement in the Pan for 4 - 5 min. If the |
| Kneading Paddle does not operate after this period of |
| time, check to see if the Kneading Paddle is engaged in |
| the machine correctly. |
|
|
The Breadman® stops | This happens if you press the STOP Button, if you |
| unplug the machine, or if there is a power outage. In each |
| case, the Breadman® can't be restarted for this Cycle. |
| Discard the contents of the Bread Pan and start again |
| with new ingredients. |
|
|
8.
(inside)
9.
10. 11.
1. | Removable Lid (P/N 21789) | 8. | Drive Shaft (inside) |
2. | Viewing Window | 9. | Power Supply Cord |
3. | Steam Vents | 10. | Heating Element |
4. | Bread Pan Handle | 11. | Oven Chamber |
5.Bread Pan (P/N 20101)
6.Kneading Paddle (P/N 20102)
7.Control Panel
26 | 3 |
