ADDITIONAL IMPORTANT SAFEGUARDS
WARNING: This appliance generates heat and escaping steam during use. Use proper precautions to prevent risk of burns, fires, or other injury to persons or damage to property.
1.Always use oven mitts when handling hot materials and allow metal parts to cool before cleaning.
2.Do not place the appliance on an unsteady or
3.Keep the appliance at least 2 inches away from walls or any other objects when using it.
CAUTION: During use, the internal parts of the Breadman® and the area around the Steam Vent and Viewing Window are HOT. Keep out of reach of children to avoid possible injury.
POLARIZED PLUG
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.
ELECTRIC POWER
If the electrical circuit is overloaded with other appliances, your appliance may not operate properly. It should be operated on a separate electrical circuit from other appliances.
TROUBLE SHOOTING (CONTINUED)
Symptom | Possible Solutions |
|
|
The Bread Machine The Dough program was selected. To bake the bread, choose
does not bake the appropriate program for baking bread. the bread
Bread has an | Check to be sure you added the correct amount of yeast. |
offensive odor | Measure carefully — too much yeast will cause an unpleasant |
| odor and may cause the loaf to rise too high. |
| Be sure to use only fresh ingredients. |
|
|
Baked bread is soggy | Remove the bread from the Bread Pan as soon as it is |
or the bread’s surface | done baking. Leaving it in the Pan allows condensation |
is sticky | to collect on the sides touching the Pan. |
| Also be sure to cool the loaf on a wire rack; cooling it on |
| a countertop causes the side next to the counter to |
| become soggy. |
|
|
The Kneading | Make sure the Kneading Paddle is mounted properly before |
Paddle was stuck | adding ingredients to the Bread Pan and baking. |
in the bread | Sometimes denser or crustier loaves of bread may pull the |
| Kneading Paddle out with them when you remove the loaves |
| after baking. When this happens, use a |
| gently remove the blade from the bottom of the loaf. |
|
|
The bread rose | Make sure not to add too much yeast, water or flour. Too |
too high | much of any of these may cause the loaf to rise more than |
| it should. |
The bread didn’t rise enough
Did you add enough yeast, water or sweetener?
Make sure to add ingredients in the proper order: liquids, dry ingredients, yeast. Make sure yeast doesn’t get wet until the Breadman® mixes the ingredients together.
NOTE: Typically, bread made with whole grain flours will not rise as high as bread made with refined flours. Make sure you are using bread flour.
2 | 27 |
