2 Select [Answ. Machine] > [Remote access] > [Change PIN], then press MENU/OK to confirm.
3 Enter the old PIN/passcode, then press MENU/OK to confirm.
4 Enter the new PIN/passcode, then press MENU/OK to confirm.
5 Enter the new PIN/passcode again, then press MENU/OK to confirm.
»»The setting is saved.
Access the answering machine remotely
1 Make a call to your home number with a touch tone phone.
2 Enter # when you hear the announcement.
3 Enter your PIN code.
»»You now have access to your answering machine, and you can listen to the new messages.
Note
•• You have 2 chances to enter the correct PIN code before your phone hangs up.
4 Press a key to carry out a function. See the Remote access commands table below for a list of available functions.
Note
•• When there is no message, the phone hangs up automatically if no key is pressed for 8 seconds.
Remote access commands
Key Function
1Repeat the current or listen to the previous message.
2Listen to messages.
3Skip to the next message.
6 Delete the current message.
7Switch the answering machine on. (not available when you listen to the messages).
8Stop listening to the message.
9Switch the answering machine off. (not available when you listen to the messages).
EN 23
