FastTrak100 User Manual
Microsoft Millennium
Installing Drivers During Millennium Installation
The following details the installation of the FastTrak100 drivers while installing Microsoft’s Millennium (with the FastTrak100 controller card already in place). If you’re installing the FastTrak100 drivers on a system with Millennium already installed, see “Installing Drivers with Existing Millennium System.”
1.Install Microsoft Millennium fully.
2.After installation, go the “Start” menu and choose “Settings.”
3.From the “Settings” menu, choose “Control Panel.”
4.In the “Control Panel” window,
5.In the “System” window, choose the “Device Manager” tab.
6.In the hierarchical display under “Other Devices” is a listing for “PCI RAID Controller.” Choose it and then press the “Properties” button.
7.Choose the “Driver” tab in the “Properties” window, choose “Update Driver,” and then press “Next.”
8.Choose “Search for a better driver than the one your device is using now (recommended),” then press “Next.”
9.Choose “Specify Location,” and then type “A:\WINME” in the text box.
10.Insert the “FastTrak100 Driver” diskette into the A: drive.
11.Press the “Next” button. A message informing you that Windows Millennium has found “Windows Millennium Promise FastTrak100 Controller” should appear.
12.Press “Next,” then “Finish,” then “Yes” when asked if you want to restart your computer. Be sure to remove the diskette from drive A:.
36
